Wulfsberg Electronics Division 2000-UHF1 用户手册

Wulfsberg Electronics

P-2000 and C-2000/RT-2000 Operator’s Manual

Document 150-041102 Revision A

Page 22 of 37

Relay-Simulcast mode combines the functions of Relay Mode and Simulcast Mode.  It allows you to establish an
automatic radio link with two other locations that have radios tuned to different frequencies in different frequency
bands, and allows you to transmit to those same locations simultaneously.  You can establish relay/simulcast
operation as follows:

•  From the HOME page select the desired channel for radio 1 and establish communications on that channel.

•  From the HOME page select the desired channel for radio 2 and establish communication on the channel.

•  Press the MODE button until the following display page appears:

•  Select the RELAY/SIMULCAST MODE by high-lighting the option and pressing the ENTER button.  The unit

will now enter the RELAY/SIMULCAST mode and the display will look like the one below:

•  Now the unit will RELAY between FM1/FM2 and it will also SIMULCAST on both transceivers when the

operator chooses either FM1 or FM2 audio panel positions.

•  To exit the RELAY/SIMULCAST MODE, simply press the HOME button.