Wulfsberg Electronics Division 2000-UHF1 用户手册

Wulfsberg Electronics

P-2000 and C-2000/RT-2000 Operator’s Manual

Document 150-041102 Revision A

Page 21 of 37

Simulcast Mode allows you to transmit simultaneously to two other locations that have radios tuned to different
frequencies.  You can establish simulcast operation as follows.

•  From the HOME page select the desired channel for radio 1 and establish communications on that channel.

•  From the HOME page select the desired channel for radio 2 and establish communication on the channel.

•  Press the MODE button and the Mode Selection page will be displayed:

•  Select the SIMULCAST MODE by high-lighting the option and pressing the ENTER button.  The unit will now

enter the SIMULCAST mode and the display will look like the one below:

•  Use either RT1 or RT2 mic position on the audio selector panel and initiate a transmission.  Both radios will

transmit at the same time.

•  To exit the SIMULCAST MODE, simply press the HOME button.