Datalogic PowerScan PD9500 PD9530-HPK1 数据表

References

296

PowerScan™ PD9530/PBT9500/PM9500

This feature specifies the amount of time reader illumination stays off after 

pulling the trigger when in Stand Mode. The configurable range is 01 to 32 

by 01 in increments of 500ms (500ms to 16 seconds).
Follow these instructions to set this feature:

1. Determine the desired setting.
2. Pad the result with leading zeroes to yield two digits. For example: 2 = 

02, 5 = 05, 20 = 20, etc.

3. Go to 

 and scan the ENTER/EXIT PROGRAMMING MODE bar code 

to enter Programming Mode.

4. Scan the bar code: Set Stand Mode Illuminator Off Time.
5. Scan the appropriate two digits from the keypad in 

, that represent the setting which was determined in the steps 

above. You will hear a two-beep indication after the last character.

6. Scan the ENTER/EXIT PROGRAMMING MODE bar code to exit Program-

ming Mode.

This completes the procedure. See 

 for some examples of how to 

set this feature.

500 ms

1 Second

5.5 Seconds

16 Seconds

01

02

11

32

‘0’ and ‘1’

‘0’ and ‘2’

‘1’ and ‘1’

‘3’ and ‘2’