Elica ERS63XSS 安装指导

Determine which venting method is best for your application.

Vent system can terminate either through the wall or floor.

A. Down vent

B. Cooktop

C. Aspiration plate

A. Down vent

B. Left vent

C. Right vent

Vent systems installed under a concrete slab using PVC sewer 

pipe.

A. Wall cap

B. 6” (15.2 cm) round metal vent

C.16” (40.6 cm) maximum

D. 6” (15.2 cm) round PVC swer pipe

E. 6” (15.2 cm) round metal vent transi-

tion with damper (supplied)

F. 6” (15.2 cm) round PVC coupling 

G. Concrete slab

H. 6” (15.2 cm) round PVC sewer pipe

I. 6” (15.2 cm) round 90º PVC sewer       

     pipe elbow

J. Tightly pack gravel or sand 

    completely around pipe

K. 6” (15.2 cm) round 90º PVC sewer       

     pipe elbow

L. 6” (15.2 cm) round PVC coupling

M. 12” (30.5 cm) minimum

 

Failure to do so can result in back or other injury. 

1.  Place cardboard or similar material on top of a flat surface where 

 

you can easily assemble the downdraft vent system.

2.  Remove parts packages, downdraft vent and blower box from the 

 carton.

3.  Remove all shipping materials, tape and film from the downdraft 

 

vent and blower box.

4.  Install the right and left undercounter mounting brackets to the 

 

vent box. Slide the keyhole slots over the guide tabs and push 

 

the brackets up to set them in place.

A. Vent box

B. Undercounter mounting bracket

C. Keyhole slots

D. Guide tabs

5.  Attach the end cap to the vent box, depending on what vent  

 

position you choose (standard-reversible). Place the tabs into the  

 

mounting slots at each end of the downdraft vent as shown and 

 

push down to lock into place. 

C. Standard installation cap

D. Reversible installation cap