Atmel ARM-Based Evaluation Kit AT91SAM9N12-EK AT91SAM9N12-EK Data Sheet
Product codes
AT91SAM9N12-EK
374
SAM9N12/SAM9CN11/SAM9CN12 [DATASHEET]
11063K–ATARM–05-Nov-13
30.7
External Memory Mapping
The SMC provides up to 26 address lines, A[25:0]. This allows each chip select line to address up to 64 Mbytes of
memory.
memory.
If the physical memory device connected on one chip select is smaller than 64 Mbytes, it wraps around and appears to
be repeated within this space. The SMC correctly handles any valid access to the memory device within the page (see
be repeated within this space. The SMC correctly handles any valid access to the memory device within the page (see
A[25:0] is only significant for 8-bit memory, A[25:1] is used for 16-bit memory, A[25:2] is used for 32-bit memory.
Figure 30-2. Memory Connections for Eight External Devices
30.8
Connection to External Devices
30.8.1 Data Bus Width
A data bus width of 8, 16, or 32 bits can be selected for each chip select. This option is controlled by the field DBW in
SMC_MODE (Mode Register) for the corresponding chip select.
SMC_MODE (Mode Register) for the corresponding chip select.
shows how to connect a 512K x 8-bit memory on NCS2.
shows how to connect a 512K x 16-bit
memory on NCS2.
NRD
NWE
A[25:0]
D[31:0]
8 or 16 or 32
Memory Enable
Memory Enable
Memory Enable
Memory Enable
Memory Enable
Memory Enable
Memory Enable
Memory Enable
Output Enable
Write Enable
A[25:0]
D[31:0] or D[15:0] or
D[7:0]
D[7:0]
NCS3
NCS0
NCS1
NCS2
NCS7
NCS4
NCS5
NCS6
NCS[0] - NCS[7]
SMC