Toshiba Tortilla Maker HV6FS-MLD Installationsanweisungen

 

 

 

 
HANDLING AND MOVING 

 
When handling and moving the circuit breaker 
and cell, the techniques shown in this section 
may be used. 
 
Care and caution should be used when handling 
the circuit breaker and cell units to avoid damage 
to the equipment and personal injury.  Always 
keep the equipment in a generally upright 
position. 
 
Refer to  Fig. 8 and Fig. 9 for the correct 
methods of lifting and moving the circuit breaker 
and cell. 
 
When lifting the circuit breaker, attach a wire 
sling to the bolts on the upper left and right 
corners of the housing as shown in Fig. 8.  For 
the cell, the sling is attached to the holes located 
in the upper left and right rear of the support 
frame as shown in Fig. 9. 
  
Always use lifting equipment suitable for the 
weight of the units.  The capability of the lifting 
equipment to handle the size and weight of the 
circuit breaker and cell should be confirmed prior 
to lifting. 
 
 
 

 

 
 

 
 
 

 

 

CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net