Renesas rl78 User Manual
RL78/G1A
CHAPTER 15 DMA CONTROLLER
CHAPTER 15 DMA CONTROLLER
The RL78/G1A has an internal DMA (Direct Memory Access) controller.
Data can be automatically transferred between the peripheral hardware supporting DMA, SFRs, and internal RAM
without via CPU.
As a result, the normal internal operation of the CPU and data transfer can be executed in parallel with transfer
between the SFR and internal RAM, and therefore, a large capacity of data can be processed. In addition, real-time
control using communication, timer, and A/D can also be realized.
15.1 Functions of DMA Controller
{ Number of DMA channels: 2 channels
{ Transfer unit: 8 or 16 bits
{ Maximum transfer unit: 1024 times
{ Transfer type: 2-cycle transfer (One transfer is processed in 2 clocks and the CPU stops during that processing.)
{ Transfer mode: Single-transfer mode
{ Transfer request: Selectable from the following peripheral hardware interrupts
{ Transfer unit: 8 or 16 bits
{ Maximum transfer unit: 1024 times
{ Transfer type: 2-cycle transfer (One transfer is processed in 2 clocks and the CPU stops during that processing.)
{ Transfer mode: Single-transfer mode
{ Transfer request: Selectable from the following peripheral hardware interrupts
• A/D converter
• Serial interface
• Serial interface
(CSI00, CSI01, CSI10, CSI11, CSI20, CSI21, UART0 to UART2)
• Timer (channel 0, 1, 2, 3)
{ Transfer target: Between SFR and internal RAM
Here are examples of functions using DMA.
• Successive transfer of serial interface
• Consecutive capturing of A/D conversion results
• Consecutive capturing of A/D conversion results
<R>
• Capturing port value at fixed interval
R01UH0305EJ0200 Rev.2.00
668
Jul 04, 2013