Avaya 03-300430 User Manual

Communication Manager Maintenance-Object Repair Procedures

1074 Maintenance Procedures for Avaya Communication Manager 3.0, Media Gateways and Servers

Figure 54: Loopback Points for Test #799

Table 367: Test #799 Near-End External Loop-Back Test

Error
Code

Test
Result

Description / Recommendation

2100

ABRT

Could not allocate the necessary system resources to run this test.

1. Retry the command at 1-minute intervals up to 3 times.

2000

ABRT

Timed out while waiting for a response from the circuit pack.

1. Retry the command at 1-minute intervals up to 3 times.

2300

ABRT

The downlink message necessary to run this test could not be sent.

1. Retry the command at 1-minute intervals up to 3 times.

2301

ABRT

The timer could not be set before sending the downlink message
necessary to run this test.

1. Retry the command at 1-minute intervals up to 3 times.

2316

ABRT

Fiber link is not administered.

●

Use add fiber-link to administer the DS1 converter fiber link.

2321

ABRT

DS1 facility is not busied out.

●

Busyout the DS1 facility via busyout ds1-facility.

●

If there is only one DS1 facility, busyout the DS1 converter circuit
pack via busyout board.

2332

ABRT

With this system configuration, test is not allowed to execute at the far end

when there is only one DS1 facility available. Check the green LED at the

face plate of the DS1 converter circuit pack. The green LED should be on if

the loop is complete.

1 of 2

LB 2

LB 1

DS1 Facility

DS1CONV

CSU A

Test starts here

CSU B

DS1CONV