Avaya 03-300430 User Manual
ISDN-TRK (DS1 ISDN Trunk)
Issue 1 June 2005
1457
Table 524: Test #6 NPE Crosstalk Test
Error
Code
Code
Test
Result
Result
Description / Recommendation
ABRT
Could not allocate the necessary system resources to run this test.
1. Retry the command at 1-minute intervals up to 5 times.
1000
ABRT
System resources required to run this test are not available. The port may
be in use on a valid call.
be in use on a valid call.
1. Use status station or status trunk to determine when the port
is available for testing.
2. Retry the command at 1-minute intervals up to 5 times.
1001
ABRT
Could not allocate the necessary system resources to run this test.
1. Retry the command at 1-minute intervals up to 5 times.
1002
ABRT
The system could not allocate time slots for the test. The system may be
under heavy traffic conditions or it may have time slots out of service due
to TDM-Bus errors.
under heavy traffic conditions or it may have time slots out of service due
to TDM-Bus errors.
1. If the system has no TDM-Bus errors and is not handling heavy traffic,
repeat test at 1-minute intervals up to 5 times.
1003
ABRT
The system could not allocate a tone receiver for the test. The system may
be oversized for the number of Tone Detectors present, or some Tone
Detectors may be out of service.
be oversized for the number of Tone Detectors present, or some Tone
Detectors may be out of service.
1. Resolve any TTR-LEV errors.
2. Resolve any TONE-PT errors.
3. If neither condition exists, retry the test at 1-minute intervals up to 5
times.
1004
ABRT
The port has been seized by a user for a valid call. Use status station
or status trunk to determine when the port is available for testing.
1. Retry the command at 1-minute intervals up to 5 times.
1018
ABRT
Maintenance is disabled on this trunk.
1. Enable maintenance by entering y in the Maintenance Tests field on
the change trunk-group form.
1117
ABRT
A service state audit message is outstanding.
1. Wait 2 minutes and then try again.
1 of 2