Avaya 03-300430 User Manual

ABRT

Could not allocate the necessary system resources to run this test.

1. Retry the command at 1-minute intervals up to 5 times.

1000

ABRT

System resources required to run this test are not available. The port may 

be in use on a valid call. Use status station or status trunk to 

determine when the port is available for testing.

1004

ABRT

The port has been seized by a user for a valid call. Use status station 

or status trunk to determine when the port is available for testing.

1. Retry the command at 1-minute intervals up to 5 times.

1018

ABRT

Maintenance is disabled on this trunk.

1. Enable maintenance by entering y in the Maintenance Tests field 

on of the change trunk-group form.

1020

ABRT

The test did not run due to an already existing error on the specific port or 
a more general circuit pack error.

1. Examine Error Log for existing errors against this port or the circuit 

pack and attempt to diagnose the already existing error.

1412

ABRT

This test does not execute on a G700/G350 Media Gateway.

2000

ABRT

Response to the test request was not received within the allowable time 
period.

1. Retry the command at 1-minute intervals up to 5 times.

2100

ABRT

Could not allocate the necessary system resources to run this test.

1. Retry the command at 1-minute intervals up to 5 times.

Any

FAIL

The NPE of the tested port did not conference the tones correctly. This will 
cause noisy and unreliable connections.

1. Replace the circuit pack.

PASS

The port can correctly conference multiple connections. User-reported 

troubles on this port should be investigated using other port tests and 

examining station, trunk, or external wiring.