Avaya 03-300430 User Manual

CAUTION:

This test resets the Media Module. The test is highly destructive and can only be 
initiated by a system technician-demanded reset board location 

command.

None

ABRT

System resources required for this test are not available.

1. Retry the reset board command at 1-minute intervals a maximum 

of 5 times.

1005

ABRT

Wrong Media Module configuration to run this test. This error applies 
only to DS1 Interface Media Modules. It means the DS1 Interface Media 
Module is providing timing for the system, and therefore, it cannot be 
reset without major system disruptions.

1. If the Media Module needs to be reset, then set synchronization to 

another DS1 Interface Media Module or to the Tone-Clock Media 
Module and try again. 

1015

ABRT

Port is not out-of-service.

1. Busyout the Media Module.

2. Execute the reset board command again.

2100

ABRT

System resources required for this test are not available.

1. Retry the reset board command at 1-minute intervals a maximum 

of 5 times.

1

FAIL

The Media Module failed to reset.

1. Execute the reset board command again.
2. If the problem persists, replace the Media Module.

2

FAIL

The Media Module failed to restart.

1. Execute the reset board command again.
2. If the problem persists, replace the Media Module.

 1 of 2