Avaya 03-300430 User Manual

1000

ABRT

Note:

System resources required for this test are not available. 
The port may be in use on a valid call. Determine whether 
the port is available for testing.

2. Retry the command at 1-minute intervals up to 5 times.

1001

ABRT

System resources required to run this test are not available.

1. Retry the command at 1-minute intervals up to 5 times.

1002

ABRT

The system could not allocate time slots for the test. The system may be 
under heavy traffic conditions, or it may have time slots out-of-service due 
to TDM-BUS errors.

1. If the system has no TDM-BUS errors and is not handling heavy 

traffic, repeat the test at 1-minute intervals up to 5 times.

1003

ABRT

The system could not allocate a tone receiver for the test. The system 
may be oversized for the number of Tone Detectors present or some Tone 
Detectors may be out-of-service.

1. Resolve any TTR-LEV errors.

2. Resolve any TONE-PT errors.

3. If neither condition exists, retry the test at 1-minute intervals up to 5 

times.

1004

ABRT

The port has been seized by a user for a valid call. Determine whether the 
port is available for testing.

1. Retry the command at 1-minute intervals up to 5 times.

1020

ABRT

The test did not run due to a previously existing error on the specific port 
or because of a more general circuit pack error.

1. Examine the Error Log for existing errors against this port or the 

circuit pack, and attempt to diagnose the previously existing errors.

2000

ABRT

A response to the test was not received within the allowable time period.

1. Retry the command at 1-minute intervals up to 5 times.

2100

ABRT

System resources required for this test are not available.

1. Retry the command at 1-minute intervals up to 5 times.

 2 of 3