Avaya 03-300430 User Manual

Page of 2574
MODEM-PT (Modem Pool Port)
Issue 1 June 2005
1687
 
2000
ABRT
The response to the test was not received in the allowable time period.
1. Retry the command at 1-minute intervals up to 5 times.
2012
ABRT
Internal system error
1. Retry the command at 1-minute intervals up to 5 times.
2100
ABRT
System resources required for this test are not available.
1. Retry the command at 1-minute intervals up to 5 times.
2103
ABRT
The system could not make the conference connection for the test.
1. Retry the command at 1-minute intervals up to 5 times.
4000
ABRT
System resources needed to complete the test could not be allocated. 
Ordinarily, this means the conversion resource or other hardware used 
during the test was in use.
1. Wait 1 minute and attempt the test again.
2. If the same error occurs, use status port to determine whether 
the Modem Pool conversion resource is in use.
3. If the conversion resource is in use, and it is absolutely necessary to 
test it, the call must be dropped by issuing busyout port 
location
 against the conversion resource. Run the test again.
4. If the same error occurs while the conversion resource is idle, 
busyout both Modem Pool conversion resources on the TN758 
Pooled Modem circuit pack containing the conversion resource 
under test. Run the test again.
5. If the test continues to abort, replace the Pooled Modem circuit pack 
and retest.
65515
ABRT
System resources required for this test are not available.
1. Retry the command at 1-minute intervals up to 5 times.
2. Enter test port long on the port on which the test aborted. If any 
test aborted or failed, follow recommended maintenance strategy for 
the appropriate port type (for example, 
Table 623: Test #97 Modem Pool Conference Test  (continued)
Error
Code
Test
Result
Description / Recommendation
 2 of 3