Avaya 03-300430 User Manual

Only one value (Pass, Fail, or Abort) is generated as a result of the two tests. If it fails or aborts, 
the sequence is stopped.

ABRT

Internal system error

1. Retry the command at 1-minute intervals up to 5 times.

2. If the test continues to abort, escalate the problem.

1000

ABRT

The port is use on a valid ISDN-PRI test call. Use list 
isdn-testcall to determine which call is using the port (from the M/T 

Port column). Wait for the test call to complete as indicated in the Start 
Time and Duration fields, or abort the test call with clear 
isdn-testcall grp#/mem#, where grp#/mem# is determined from 

the B-channel field of list isdn-testcall.

1. Retry the command at 1-minute intervals up to 5 times.

2. If the test continues to abort and the port is idle, escalate the 

problem.

1001

ABRT

System resources required to run this test are not available.

1. Retry the command at 1-minute intervals up to 5 times.

2. If the test continues to abort, escalate the problem.

1002

ABRT

The system could not allocate time slots for the test. The system may be 
under heavy traffic conditions, or it may have time slots out-of-service 
due to TDM-BUS errors.

1. If the system has no TDM-BUS errors and is not handling heavy 

traffic, repeat the test at 1-minute intervals up to 5 times.

2. If the test continues to abort, escalate the problem.

1003

ABRT

The system could not allocate a tone receiver for the test. The system 
may be oversized for the number of tone detectors present, or some 
tone detectors may be out-of-service.

1. Resolve any TTR-LEV errors.

2. Resolve any TONE-PT errors.

3. If neither condition exists, retry the command at 1-minute intervals 

up to 5 times.

4. If the test continues to abort, escalate the problem.

 1 of 2