Avaya 03-300430 User Manual

2000

ABRT

Response to the test request was not received within the allowable time 
period.

1. Retry the command at 1-minute intervals up to 5 times.

2. If the test aborts with Error Code 2000 again, run short test 

sequence on the associated DS1-BD or UDS1-BD. If tests 138 
through 145 on the associated DS1-BD or UDS1-BD are also 
aborting with Error Code 2000, hyperactivity on the board or facility 
is indicated. In this case, the hyperactivity problem should be dealt 
with first.

2100

ABRT

System resources required for this test are not available.

1. Retry the command at 1-minute intervals up to 5 times.

Any

FAIL

The test failed. This can be due to on-board or off-board problems. 
Off-board problems of concern include EXP-PN, EXP-INTF, or 
RMC-ENV faults, TDM-BUS faults, and faults associated with the tone 
detectors/tone generators. Clear every off-board problem before 
replacing the board. Keep in mind that a TDM-BUS problem is usually 
the result of a faulty board connected to the backplane or bent pins on 
the backplane.

1. Resolve any TONE-BD and/or TONE-PT errors.

2. Retest when the faults from step 1 are cleared.

PASS

The port is correctly using its allocated time slots. User-reported troubles 

on this port should be investigated using other port tests and by 

examining station, trunk, or external wiring.

 3 of 4