Avaya 03-300430 User Manual

e. Error Type 513: Test #48 may cause some terminal equipment to ring briefly during daily 

maintenance. If this disturbs the customer or the terminal equipment, disable it by setting 
the Tests field on the change station extension screen to n. On some software 

releases, this will also disable Tests #7 and 35.

f. Error Type 2817: the endpoint caused a large number of control channel messages to be 

sent to the switch within a short period of time (50 or more CCMS uplinks within 10 
seconds). The station will be taken out-of-service for 30 seconds due to the hyperactivity. 
This may be completely normal during heavy traffic periods.

Investigate tests in the order presented below. Clearing Error Codes associated with the one 
test may also clear errors generated from other tests in the sequence.

The battery feed chip provides power to the telephone equipment, signaling, rotary dial pulsing, 
transmission, and balance. This test checks the signaling and switchhook capabilities of the 
battery feed chip by terminating the port, applying battery and detecting the resulting current.

1. D = Destructive; ND = Nondestructive

Battery Feed test (#35)

X

X

ND

Station Present test (#48)

X

X

ND

Station Status and Translation Audits and Updates test (#36)

X

X

ND

ABRT

Could not allocate the necessary system resources to run this test.

1. Retry the command at 1-minute intervals up to 5 times.

 1 of 3