Avaya 03-300430 User Manual

137

FAIL

The SNI’s administered neighbor does not match the physical neighbor 
connected. The type of neighbor administered is an EI and the type of 
neighbor physically connected is an SNI.

1. Enter list fiber-link, and verify that the fiber-optic cable and 

metallic cable connections are installed as administered.

138

FAIL

The physical neighbor location does not match administered neighbor 
location. The carrier and slot of the administered neighbor do not match 
the carrier and slot of the physical neighbor. 

1. Enter list fiber-link, and verify that the fiber-optic cable and 

metallic cable connections are installed as administered.

2. If the problem does not seem to be caused by a physical connection 

problem or an administration problem, replace the neighbor circuit 
pack. It is possible for the neighbor circuit pack to have a hardware 
problem that causes it to report a wrong angel address (physical 
carrier/slot address) to software.

139

FAIL

The SNI is administered as connected to a DS1C but is not physically 

connected to a DS1C.
If a DS1C is not supposed to be connected to this SNI, change 
administration to remove the DS1 converter complex from the fiber link 
associated with this SNI:

1. Use list fiber-link to determine the fiber associated with the 

SNI.

2. Use remove fiber-link to remove the fiber.
3. Use add fiber-link to add the fiber back, and do not administer 

the DS1 converter complex at this time.

 12 of 13