Avaya 03-300430 User Manual

1015

ABRT

The port is not out-of-service.

1. Use status bri-port location to determine the status of 

the port.

2. If it is in use, wait until it is idle, and then use busyout port 

location to place it in the out-of-service state and repeat this 

test.

CAUTION:

Since the busyout command is destructive, execution 
of this command prior to the port being idle causes 
every call associated with the BRI port to be torn 
down.

1139

ABRT

The Packet bus in the port network is out-of-service.

1. Follow the repair procedures for the Packet bus.

2. Run test port location long and verify the repair by 

viewing the results of the BRI Port Local LAN Loop-Around test 
(#618).

1141

ABRT

The PKT-CTRL is out-of-service.

1. Follow the repair procedures for the PKT-CTRL.

2. Run test port location long and verify the repair by 

viewing the results of the BRI Port Local LAN Loop-Around test 
(#618).

1144

ABRT

The Processor Port Network Packet Bus is out-of-service

1. Follow the repair procedures for the Packet Bus.

2. Run the test port location long and verify the repair by 

viewing the results of the BRI Port Local LAN Loop-Around test 
(#618).

 / 

:

1412

ABRT

This test does not execute on a G700 media gateway.

2012

2100

ABRT

Internal system error
Could not allocate the necessary system resources to run this test.

1. Retry the command at 1-minute intervals up to 5 times.

 1 of 2