Avaya 03-300430 User Manual

The two maintenance commands for ADM TSCs are as follows:

●

test tsc-administered signaling-group-number [/tsc-index]

●

status tsc-administered signaling-group-number [/tsc-index]

Note:

a. Error Types 3840 - 3967: there is no Test to Clear Value for these Error Types which 

provide the following additional data that may prove useful when tracking down problems.

Any of these errors indicates that a TSC Heartbeat Inquiry test was run on an active far-end 
Administered TSC from the switch. Upon receiving the heartbeat message, the network 
communicated that the call was unable to complete. As a result, the error was logged. 

1. Check the signaling group status of the D channel or D-channel pair using status 

signaling-group grp# for the Administered TSC. 

2. Check the status of the Administered TSC using status tsc-administered. 
3. Also check the administration of the Administered TSC on the switch.

This error may only be affecting service for some DCS customers. Upon receipt of this error 
condition, the switch will tear down and re-establish the ADM TSC within 20 minutes.

The Port field in the error log contains the signaling group number for TSC-ADM errors.

3840-

3967 (

)

tsc index #

TSC Heartbeat Inquiry test (#604)

Nondestructive