Avaya 03-300430 User Manual

This test is nondestructive.
The VAL circuit pack detects invalid frames when it receives

●

a frame with a CRC error.

●

an unrecognizable frame.

●

a recognizable frame in an unexpected state.

When the VAL circuit pack detects an invalid LAPD frame, it increments the Invalid LAPD Frame 
error counter. This test reads and clears the counter, and verifies the repair of the problem.
Errors can indicate a:

●

circuit pack problem.

●

packet bus problem.

●

problem with another circuit pack on the bus.

2000

ABRT

Did not receive circuit pack test response within the allowable time period.

1. Retry command at 1-minute intervals up to 5 times.

2. If the problem persists, reset the circuit pack (reset board 

location).

3. If the problem persists, replace the circuit pack.

2100

ABRT

Could not allocate the necessary system resources to run this test.

1. Retry the command at 1-minute intervals up to 5 times.

2. If the problem persists, escalate the problem.

2500

ABRT

Internal system error.

1. Retry the command at 1-minute intervals up to 5 times.

2. If the problem persists, escalate the problem.

 1 of 2