Avaya 03-300430 User Manual

1141

ABRT

The PKT-CTRL is out-of-service.

1. Refer to PKT-CTRL (Packet Control Circuit Pack) Maintenance 

documentation.

2. If step 1 does not resolve the problem, escalate to the next tier.

1187

ABRT

The circuit pack, port or station may have been busied out by a technician.

1. Look in the Error Log for Error Type 18 (busied out) for BRI-BD, 

BRI-PORT, or BRI-SET.

a. If this error type is present for BRI-SET only, use release 

station to release the station.

b. If this error type is present for BRI-PORT and BRI-SET, use 

release port location and run the test again.

c. If the error is present for BRI-BD, BRI-PORT, and BRI-SET, use  

release port location to release the circuit pack, and run the 

test again.

If the error is present for BRI-SET only, use release port 
location to release the circuit pack, and run the test again. 

If the error is present for both BRI-BD and BRI-PORT, use  release 
board location to release the circuit pack, and run the test 

again.

Note:

When you release the circuit pack, you release every port 
associated with it.  If ports still need to be busied out, use 
busyout port location.

2. Make sure the terminal is connected.

3. Retry the command at 1-minute intervals up to 5 times.

4. If the test continues to abort, escalate the problem.

2012

ABRT

Internal system error.

2100

ABRT

Could not allocate the necessary system resources to run this test.

1. Retry the command at 1-minute intervals up to 5 times.

2. If the test continues to abort, escalate the problem.

 2 of 3