Cisco Cisco Unified MeetingPlace Audio Server Maintenance Manual
7-5
Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8112)
OL-
Chapter 7 Installing a Shadow Server
Configuring the primary server
Step 3
If you do not already have terminal logging turned on, turn it on before proceeding. For information on
logging, see the
logging, see the
.
Step 4
At the tech$ prompt, type
net
and press Enter. The first six lines in
prompts you to enter a selection.
Figure 7-2
net Command Menu
Step 5
Type
3
appears prompting you
to enter a unit number.
Step 6
Type
9
to select unit 9 and press Enter. The last five lines in
appear.
Step 7
Type
2
and press Enter to modify the server configuration.
Step 8
If unit 9 is currently inactive (which it should be) you are asked if you want to make it active. Type
y
and
press Enter to make it active. See
.
Figure 7-3
Modifying Unit 9
Step 9
Select options
3
,
4
,
5
, and
6
consecutively and enter the appropriate data collected from
following the prompts.
If you do not want to change a specific value, simply press Enter and nothing is changed.
Step 10
If the shadow server is located at a different site, type
2
and press Enter to select a different site for the
shadow server.
Step 11
Once you have confirmed that the shadow server is set to active, type
99
and press Enter to return to the
main “net” command menu. A screen similar to the first 14 lines of
appears.
meetingplace:csc$ net
1) View the server & site configuration
2) Modify the server configuration
3) Select another server (current unit = #0)
99) Quit
Select: 3
Unit: 9
1) View the server & site configuration
2) Modify the server configuration
3) Select another server (current unit = #9)
99) Quit
Select: 2
You have selected a new configuration for this unit.
Unit class = SHADOW
Site class = REMOTE
Update the initialization file (y/[n])? y
DONE
NOTE: Changes take effect with the next restart of the unit.
Unit class = SHADOW/REMOTE