Cisco Cisco Unified MeetingPlace Audio Server Maintenance Manual

Cisco

E-2

Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8112)

OL-

Appendix E Installation Checklists

Installation checklist

Table E-2

Installation Checklist

X

Procedure

Section and Page

Remove the shipping material.

“Removing the shipping
material” section on
page 3-10

Inspect the server for damage.

“Inspecting for damage”
section on page 3-12

Verify the contents of the boxes.

“Verifying the contents of the
boxes” section on page 3-12

Mount the server.

“Mounting the 8112 server”
section on page 3-13

Mount the breakout box (if necessary).

“Mounting a breakout box”
section on page 3-16

Connect the power cable.

“Connecting the power cable”
section on page 3-18

Connect the SCSI cable.

“Connecting the SCSI cable”
section on page 3-19

Connect the LAN cable to the CPU.

“Connecting the LAN cable
to the CPU” section on
page 3-22

Connect T1 digital trunks (for T1 CAS
systems).

“Connecting telephony cables
for a T1 CAS system” section
on page 3-23

Connect E1/T1 PRI digital trunks.

“Connecting telephony cables
for E1 and T1 PRI systems”
section on page 3-24

Connect trunks for IP systems (if
necessary).

“Connecting telephony cables
for pure IP systems” section
on page 3-33

Connect the modem.

“Installing and connecting the
modem” section on page 3-40

Connect your laptop.

“Connecting your laptop”
section on page 4-1

Set up your laptop.

“Setting up your laptop”
section on page 4-3

Power up the server.

“Powering up the server”
section on page 4-17

Configure the LAN parameters.

“Configuring the LAN
parameters” section on
page 4-19

Configure the server’s time zone.

“Configuring the server’s
time zone” section on
page 4-24