Cisco Cisco Unified MeetingPlace Audio Server Maintenance Manual

5-2

Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8106)

78-16411-01

Chapter 5 Repairing and Maintaining the 8106 Server

•

•

•

•

•

Step 4

Power up MeetingPlace. Refer to

Scheduling the repair

Before going to the customer site, arrange with the customer site contact for a no-meeting period for the
amount of time the repair requires.

Warning

Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030

Preparing for the repair

This section explains the steps that need to be performed prior to replacing any of the FRUs mentioned
in this chapter.

Step 1

Inspect the piece of new hardware to verify no damage occurred in transit.

Step 2

Verify your toolkit contains the correct tools for the repair. Refer to

for

a list of required tools.

Note

If you are replacing either of the power supply units, you do not need to complete the rest of this section.
Go directly to the

Verifying no user activity

This section explains how to verify there is no user activity on the system before shutting it down for the
repair.

Step 1

If not already connected, access the command line interface (CLI) by following the procedures in the

Note

CLI commands are case sensitive. For CLI command information, refer to

Step 2