Cisco Cisco Unified MeetingPlace Audio Server Maintenance Manual
5-8
Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8106)
78-16411-01
Chapter 5 Repairing and Maintaining the 8106 Server
Replacing a power supply unit
Step 4
Power up the server. Refer to the
Step 5
for more information.
Replacing a power supply unit
This section describes how to replace a power supply unit.
Removing an old power supply unit
Note
The 8106 server has two power supply units. You can remove either of the power supply units, but not
both, without shutting down the server or affecting performance.
both, without shutting down the server or affecting performance.
To replace both power supply units at once, you must power down the 8106 server. Refer to the
.
Step 1
Verify there is no user activity and back up the database. Refer to the
and
.
Step 2
Identify which power supply unit you are replacing. See
.
Step 3
Using a screwdriver, loosen the screw on the left side of the power supply unit.
Step 4
On the right side of the power supply unit, push the red button while pulling the black handle towards
you.
you.
Step 5
Slide the power supply unit straight out of the bay.
Warning
Do not touch any of the exposed leads, terminals, or components. Hazardous voltages, capable of
causing death, may be present in this product.
causing death, may be present in this product.
Installing a new power supply unit
Warning
Do not touch any of the exposed leads, terminals, or components. Hazardous voltages, capable of
causing death, may be present in this product.
causing death, may be present in this product.
Step 1
Slide the new power supply unit straight into the empty drive bay. You hear a click when it is completely
in.
in.
Step 2
Secure the power supply unit by pushing in the black handle on the right side.