Cisco Cisco Unified MeetingPlace Audio Server Maintenance Manual

Page of 313
5-5
Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8106)
78-16411-01
Chapter 5      Repairing and Maintaining the 8106 Server
  Replacing a disk drive
Step 5
The rest of 
 appears. Wait for the “**** LynxOS is down ****” message to appear as 
shown in the last line of 
Step 6
Turn the power switch on the back of the server to the off (“O”) position. See 
Figure 5-4
8106 Server’s Power Switch Location
Step 7
Remove the power cable from the back of the server. See 
Figure 5-5
8106 Server’s Power Cable
Replacing a disk drive
This section describes how to replace a disk drive on the 8106 server. There are two disk drives. The 
replacement procedure is the same for both.
Warning
DO NOT touch the disk drives unless the server is completely shut down and powered off.