Cisco Cisco Unified MeetingPlace Audio Server Maintenance Manual
5-10
Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8106)
78-16411-01
Chapter 5 Repairing and Maintaining the 8106 Server
Replacing the fan assembly
Figure 5-8
8106 Server’s Fan Assembly
Installing the new fan assembly
Step 1
Slide the new fan assembly into the fan assembly place on the left side of the front of the server.
Step 2
Manually tighten the three screws on the top, middle, and bottom left side of the fan assembly. No
screwdriver is necessary.
screwdriver is necessary.
Step 3
Attach the power cable to the back of the server.
Step 4
Power up the server. Refer to the
Testing the fan assembly
Step 1
If not already connected, access the CLI by following the procedures in the
and
Step 2
Login as a technician. The tech$ prompt appears.
Step 3
Turn on terminal logging. For information on logging, see the
.
Step 4
Type
hwconfig
and press Enter.
appears.