Cisco Cisco TelePresence Management Suite (TMS) Version 15 Maintenance Manual
1.
Click on the Company Name folder in the tree.
The right panel will update to show the contents of that folder.
2.
Click Edit This Folder in upper right corner of the screen.
3.
Rename the folder using the appropriate company name.
4.
Click Save.
5.
Add any additional folders:
a.
Click on the desired parent folder.
b.
Click New Folder on the right-hand side of the screen.
c.
Enter a name and, optionally, a description.
d.
Click Save.
e.
Repeat the above steps for as many folders as you wish to create.
You can add and delete folders at any time.
The root folder may not be deleted.
Adding Systems
The procedures described below are appropriate for most systems and system types.
Some systems require special procedures, see the following for further details:
■
■
.
■
■
For details of the layout and options of each of the Cisco TMS pages used in these procedures, see the reference section
.
Prerequisites for all Systems
■
An administrator username and password for the system must be available for use by Cisco TMS.
For most endpoints, this will be the default
admin account.
■
Network Services for HTTP and/or HTTPS must be enabled on the system.
■
Endpoints that have a provisioning mode must be set to
TMS.
■
If your system relies on SNMP-based autodiscovery, its NetworkServices SNMP CommunityName must be set to a
value listed in the Cisco TMS list of SNMP community names (see
value listed in the Cisco TMS list of SNMP community names (see
Administrative Tools > Configuration > Network
Settings > General Network Settings
).
Note that SNMP for purposes beyond system discovery is only used for legacy systems.
Enforcing Settings from Cisco TMS
We strongly recommend enabling Enforce Management Settings on Systems in
Administrative Tools > Configuration >
Network Settings > General Network Settings > TMS Services
before starting to add systems.
44
Cisco TelePresence Management Suite Administrator Guide
Adding and Managing Systems