Cisco CiscoWork QoS Policy Manager 4.1.2 User Guide
Appendix F CLI Command Reference for QPM Actions
Configuration on Catalyst Switches with Supervisor IOS
F-18
User Guide for QoS Policy Manager 3.0
78-12542-01
2.
set qos acl [default-action] ip acl-name dscp {dscp | trust-cos | trust-ipprec
| trust-dscp} {aggregate | microflow} policer-name [protocol source [{eq
port | range port port}] destination [{eq port | range port port}]]
| trust-dscp} {aggregate | microflow} policer-name [protocol source [{eq
port | range port port}] destination [{eq port | range port port}]]
3.
commit qos acl acl-name
4.
set qos acl map acl-name {module/port | vlan}
Configuration on Catalyst Switches with Supervisor
IOS
IOS
•
•
•
•
•
CoS, Precedence, DSCP, and DSCP Markdown Mapping on Catalyst
Switches with Supervisor IOS, page F-22
Switches with Supervisor IOS, page F-22
Port Configuration on Catalyst Switches with Supervisor IOS
When you configure the trust state for Catalyst 6000 switches with Supervisor
IOS, QPM uses this command sequence to configure the device:
IOS, QPM uses this command sequence to configure the device:
1.
mls qos
2.
interface interfacename
3.
mls qos
4.
mls qos trust {cos | ip-precedence | dscp}
5.
mls qos vlan-based
When you configure the trust state for Catalyst 2950 switches with Supervisor
IOS, QPM uses this command sequence to configure the device:
IOS, QPM uses this command sequence to configure the device:
1.
mls qos
2.
interface interfacename
3.
mls qos