Driven Designs Inc. PPS User Manual
Page 12
POOL PATROL PA-25 & PA-30
approximately 2' of slack in the string for the alarm to function and be
removed easily. Tie down locations should be as close to the water level
as possible for the best results. You can tie down to your ladder, diving
board, or the plastic hooks that are supplied.
removed easily. Tie down locations should be as close to the water level
as possible for the best results. You can tie down to your ladder, diving
board, or the plastic hooks that are supplied.
Do not place your alarm next to the filter return. The filter inlet of your
pool should be pointed downward (Figure 8) at an angle toward the
bottom of the pool and away from the water surface. This will reduce any
surface waves and will help to avoid any false alarms when the pump
turns on.
pool should be pointed downward (Figure 8) at an angle toward the
bottom of the pool and away from the water surface. This will reduce any
surface waves and will help to avoid any false alarms when the pump
turns on.
Soft Sided Pools
Tie one end of the string to the tab on the float (Figure 7), leave about 2-
3 foot of slack, tie the other end of the sting to either a adder or another
fixed area.
Tie one end of the string to the tab on the float (Figure 7), leave about 2-
3 foot of slack, tie the other end of the sting to either a adder or another
fixed area.
IMPORTANT
Do not apply adhesive-backed hooks to your pool as removal of
the hooks may tear your pool.
the hooks may tear your pool.
Figure 8 Filter Inlet Position
Correct
Incorrect