Landis+Gyr Technology Inc. ER6R1S4 User Manual

Draft

Landis+Gyr

Chapter 6 - Scheduled Demand Reset 

User Guide

98-1723 Rev AB

67

Scheduled Commands are sent on 11/5 to all meters in the Virtual Addressing Group.

A meter added to the Virtual Addressing Group on 11/8 will receive the schedule for 11/10.

Following is the procedure for creating a Scheduled Read with Demand Reset.

1. Select Operations > Scheduled Reads > Cellular Residential. The Scheduled RF Residential 

Reads window will open, displaying any future Scheduled Reads.

2. Click New. The Scheduled Residential Read window will open, shown in Figure 6 - 2.

3. Name. Enter a name for the new scheduled read. The name must be unique to the organization.

4. Reset Demand. The Reset Demand check box must be selected to initiate the demand reset 

process at the scheduled time. Once the Reset Demand check box is selected the On Demand 
Packet drop down list will be grayed out. It is not necessary to select a packet to be transmitted.

5. Address Type. Select the desired Command Addressing Group(s) or select the desired Billing 

Cycle.

6. Request Packet. Click On Specified dates to schedule the on-demand request for specific dates 

in the future. Enter the specific date(s) in the text box separated by spaces, commas, or semi-
colons. 

Click the Recurring radio button and enter a Start Date. If needed, click the Calendar icon to 
generate a calendar from which to select a start date. 

Click the Show Recurrence Options radio button to display recurrence choices.

Do not repeat. The Scheduled Read will occur once.

Repeat every [1-2-3-4] week(s) on Sunday through Saturday. The Scheduled Read 
can be set to repeat every 1, 2, 3, or 4 weeks on any, or all, of the days of the week.