Senstar Corporation E7BA0300 User Manual
Rev A
FlexZone processor
FlexZone Wireless Gate Sensor
Page 9
Gate sensor module supervision
There are 3 selectable modes for GSM supervision:
•
Mode 1: swinging gates - GSM ignores horizontal motion (front to back) in the Z axis - any
other motion triggers supervision alarm
other motion triggers supervision alarm
•
Mode 2: vertical pivot lift-gates - GSM ignores rotational motion (up and down) in both the
X & Y axis - any other motion triggers supervision alarm
X & Y axis - any other motion triggers supervision alarm
•
Mode 3: sliding gates - any motion triggers supervision alarm
Figure 10 Setting the battery selection shunt on the GSM
Note
When used in conjunction with a magnetic contact, each supervision Mode
will ignore all motion when the GSM’s auxiliary input is active (i.e., gate
contact open).
will ignore all motion when the GSM’s auxiliary input is active (i.e., gate
contact open).
Figure 11 Supervision mode concept drawing
leave shunt parked on T8 pin 2 for
battery powered units in storage
place shunt on T8 pins 1 and 2 for
1.5 V D-cell alkaline battery
place shunt on T8 pins
2 and 3 for 3.6 V D-cell
lithium battery
2 and 3 for 3.6 V D-cell
lithium battery
battery compartment