Digital Monitoring Products Inc PC0096 User Manual

Connect the panel to the public telephone network by installing a DMP 356 RJ Cable between the panel’s J3

connector and the RJ31X or RJ38X phone jack.
A two pin header labeled RJ SUP (J7) is provided to allow monitoring of the telephone cable connected

between the panel and a RJ38X jack (pins 2 and 7 jumpered). Attach a DMP Model 306 Harness between J7

and any available zone. The J7 pins are connected via the telephone cable to the RJ38X jack pins 2 and 7.

The RJ38X jack provides a jumper between pins 2 and 7 which completes the circuit. Program the zone as a

Supervisory type (SV). When the telephone cable is removed, the keypad displays zone trouble and produces

a steady tone.

To Telephone 

Line

8

7

6

5

4

3

2

1

Ring

Tip

To Premise 

Phone(s)

Ring 1

Tip 1

The panel complies with FCC part 68 and is registered with the FCC.  
Registration number: CCKAL00BXT50
Ringer Equivalence: 0.0B

Registered terminal equipment must not be repaired by the user.  In case of trouble, the device must be 

immediately unplugged from the telephone jack. The factory warranty provides for repairs. Registered

terminal equipment may not be used on party lines or in connection with coin telephones. No tification must

be given to the telephone company with the following information:

   

a. The particular line(s) the service is connected to

     

b.  The FCC registration number

     

c.  The ringer equivalence

   

d. The make, model, and serial number of the device