Digital Monitoring Products Inc PC0181 User Manual

 

This option allows the two-button panic key operation selected at a keypad to send 

the Panic, Emergency, or Fire message to the central station receiver. Select YES to 

enable the two-button panic operation. To disable the two-button panic operation, 

select NO. Default is YES.

Select YES to allow the panel to automatically disarm the interior area(s) when 

arming all areas and a perimeter zone is not tripped during the exit delay.

This False Alarm Reduction feature keeps a user from arming the entire system 

when they do not exit and remain in the premises. Select NO to not automatically 

disarm interior area(s). Default is NO.

Select YES to display IS THIS A FALSE ALARM?  NO YES at the keypad in place of 

CANCEL  VERIFY when a burglar alarm occurs. Select NO to display CANCEL VERIFY 

for burglar alarms. This operates for ALL/PERIM and HOME/SLEEP/AWAY arming 

systems. Default is YES.

This option allows local U.S.A. weather updates to display in the Status List on the 

keypad. Enter the zip code of the user at this option. When no number is entered 

weather conditions are not displayed. Default is 

-.

This section allows you to program the panel bell output functions. If using the 

Model 1135 or 1135DB Wireless Siren, the Trip with Panel Bell option should be 

selected in the Output Information programming for the siren.

Enter the maximum time from 1 to 15 minutes that a wireless output remains on. If 

the output is manually silenced or the system is disarmed, the cutoff time is reset. 

Default is 5.

When YES is selected, the 1135/1135DB wireless siren is turned on for two seconds 

when all areas in the system are armed. The Bell Test only occurs when the areas 

are armed from a keypad. Arming performed from an Arming zone or remotely 

from Remote Link™ does not activate the Bell Test.

When Bell Test is set to YES, the closing wait function also operates. Closing Wait 

provides a delay time before a monitored system arms until the panel receives an 

acknowledgment of the closing report from the central station receiver. During the 

delay, the keypad displays ONE MOMENT .  .  . Once the closing is acknowledged, 

the keypad buzzes for one second and then displays the ALL SYSTEM ON message. If 

communication fails, the message LOCAL ALARM ONLY appears.

Enter the output number (51-54, 61-64) for an 1116 or 1117 wireless output  

when needed to follow the on and off condition of the bell action. Enter 0  

(zero) to disable.

Note: When BELL ACTION below is set to T for Temporal Code 3, this Bell Output 

action will be Pulse for wireless outputs 51-54 and 61-64.

This defines the type of Bell Action from zone alarms that will occur. Trouble 

conditions do not activate Bell Action. There are seven zone types you can  

program individually for Bell Output. To provide a steady Bell Output, enter S.  

For a pulsed output, enter P. For a Temporal Code 3 output, enter T and for no  

bell action, enter N.

Defines Bell Action for Fire Type Zones. The default is set at T.

Defines Bell Action for Burglary Type Zones. The default is set at S.

KPD PANCS NO YES

 

OCCUPIED PREMISE
  

NO   YES

 

USE FALSE ALARM

QUESTION? NO YES  

 

ENTER WEATHER  

ZIP CODE:  -

BELL OPTIONS

BELL CUTOFF:

BELL TEST  NO YES

BELL OUTPUT:

BELL ACTION . . .

FIRE    TYPE:

BURGLARY TYPE: