Digital Monitoring Products Inc PC0181 User Manual

 

For example, If the Armed Output is F05, F06 activates when Sleep is armed.

When the system is armed 

HOME, the programmed Favorite plus 2 is activated.

For example, If the Armed Output is F05, F07 activates when Home is armed.

For an All/Perimeter system:

When the system is armed 

ALL, the programmed Favorite activates.

When the system is armed 

PERIMETER, the programmed Favorite plus 1  

is activated.

For example, If the Armed Output is F05, F06 activates when Perimeter is armed.

For an Area system:

When any area of the system is armed, the programmed Favorite activates.

This output/Favorite turns on when all areas of the panel are disarmed. The output 

turns off when an area is armed.

This output/Favorite turns on any time a burglary zone goes into alarm. The output 

turns off when the area in which the alarm occurred disarms and no other burglary 

zones are in alarm. Enter 0 (zero) to disable this output.

Enter the output/Favorite to turn on steady when any area of the system is 

armed. If an alarm occurs causing the keypads to turn Red, this output pulses and 

continues to pulse for approximately three (3) minutes after the panel is disarmed. 

Enter 0 (zero) to disable.

The Arm-Alarm Output is compatible with the Model 1117 Wireless LED 

Annunciator and the Model 1116 Wireless Relay Output connected to a Model 572 

Indicator LED.
When the Model 1117 is battery operated, the LED is off when the system is 

armed to conserve battery life. If an alarm occurs, the output flashes quickly.
When using the Model 1116 connected to a Model 572, the LED is on when the 

system is armed. If an alarm occurs, the output pulses.
To operate the Arm-Alarm output within one second, program a fast response 

number from 61 to 64. Fast response operation reduces overall wireless output 

battery life.
To operate the Arm-Alarm output within 15 seconds, program a slow response 

number from 51 to 54. Slow response operation increases overall wireless output 

battery life.

Enter the desired temperature setting for all Z-Wave thermostats when the system 

is armed ALL or AWAY. When the system is disarmed the thermostats return to their 

previous settings. The range is 55-95 degrees. Enter 0 (zero) to disable.

Enter the desired temperature setting for all Z-Wave thermostats when the system 

is armed ALL or AWAY. When the system is disarmed the thermostats return to their 

previous settings. The range is 55-95 degrees. Enter 0 (zero) to disable.

This section allows you to program and name wireless outputs into the panel.

Enter an output number. Select from the following output numbers:

• 51 to 54 — Slow response time* wireless outputs (activate within 15 seconds)
• 61 to 64 — Fast response time* wireless outputs (activate within 1 second)

Note: Addresses 51 to 54 and 61 to 64 are available for wireless outputs or wireless 

key fob zones and can only be assigned to one device.

* The response time of a wireless output is the time it takes for a wireless output 

to activate once the panel event occurs. You determine whether a wireless output 

is a slow or fast response based on the output number assigned. A slow response 

DISARMED OUT:

0

BURGLARY OUT:

0

ARM-ALARM OUT:

0

HEAT SAVER
TEMPERATURE:

0

COOL SAVER
TEMPERATURE:

0

OUTPUT SETUP

OUTPUT NO: -