Olympus Winter & Ibe GmbH ESG200 User Manual

40

System settings

Selecting previously saved, preferred settings.

Assigning the foot switch and Autostart.

Save Procedure

Saving or overwriting of output settings.

Delete Procedure

Deleting previously saved settings.

Languages

Selecting the preferred language.

Available languages: English, Japanese, German, 

Chinese, French, Italian, Spanish and Portuguese.

Touch Tone

Activating or deactivating the audible feedback when 

tapping the touch screen.

Autostart Setup

Setting a time delay for Autostart.

Software Version

Showing information about the installed software 

version.

Safety Test

Opening or closing the output relays. Required for 

the annual safety check.

Bipolar Cut Setup

Switching the cutting modes for the BIPOLAR 

socket on or off.

Service

Accessing the service screen. For the technical 

service only. This screen is password protected.

Volume control for 

output tone 

Increasing or decreasing of the volume of the output 

tone.

Brightness control

Increasing or decreasing of the brightness of the 

touch screen.

Use this function to select procedure settings that were saved previously.

There are no factory settings provided for this function. If no settings are saved, the 

message [No procedure saved] is displayed on the screen [Select Procedure]. Refer to the 

section “Save Procedure - Saving and overwriting procedure settings” on page 42.

DRAFT 

– 

2017-01-17