Eurolite Superstrobe 2700 52202176 Data Sheet

• Start the music playback on your audio system.

• Adjust the volume to the level normally used.

• The stroboscope flashes with the beat of the music.

• The brightness is preset.

• As soon as the stroboscope is supplied with power, it flashes permanently.

• The brightness and the flash speed are preset.

• Activate the DMX controller.

• The brightness and the speed of the light effect depends on the value settings on the corresponding DMX

channel.

• Never operate the device without protective disk!

• The device is not suitable for continuous use. Pauses in operation increase the working life of the product.

• Never plug the power plug into a mains socket immediately after the device was taken from a cold to a warm

environment. The condensation water created thereby may damage the device. Allow the device to reach room
temperature before connecting it. Wait until the condensation water has evaporated.

• Never touch the mains plug when your hands are wet.

• Never pull the mains plug by pulling the cable from the socket. Always only use the thus provided grip area.

• Remove the mains plug from the electrical outlet if the device is not in use for a longer period of time.

• For safety reasons always pull the mains plug from the socket during a thunderstorm.

• To ensure sufficient ventilation, do not cover the device. Apart from this, the air circulation may not be obstructed

by objects such as magazines, table cloths, curtains or similar. While the device is in operation, keep a free space
of at least 1m around the device.