Motorola MPC8260 User Manual
MOTOROLA
Chapter 7. 60x Signals
7-5
Part III. The Hardware Interface
NegationÑMay occur whenever the MPC8260 must be prevented
from using the address bus. The MPC8260 may still assume address
bus ownership on the cycle BG is negated if it was asserted the
previous cycle with other bus grant qualiÞcations.
from using the address bus. The MPC8260 may still assume address
bus ownership on the cycle BG is negated if it was asserted the
previous cycle with other bus grant qualiÞcations.
7.2.1.2.2 Bus Grant (BG)ÑOutput
Following are the state meaning and timing comments for the BG signal output in external
master mode.
Following are the state meaning and timing comments for the BG signal output in external
master mode.
State Meaning
AssertedÑIndicates that the external device may, with the proper
qualiÞcation, begin a bus transaction and assume ownership of the
address bus. A qualiÞed bus grant is generally determined from the
bus state as follows: QBG = BG ¥ ÂABB ¥ ÂARTRY where ARTRY
is asserted only during the cycle after AACK. Note that the assertion
of BR is not required for a qualiÞed bus grant (for bus parking).
qualiÞcation, begin a bus transaction and assume ownership of the
address bus. A qualiÞed bus grant is generally determined from the
bus state as follows: QBG = BG ¥ ÂABB ¥ ÂARTRY where ARTRY
is asserted only during the cycle after AACK. Note that the assertion
of BR is not required for a qualiÞed bus grant (for bus parking).
NegatedÑIndicates that the external device is not granted next
address ownership.
address ownership.
Timing Comments
AssertionÑMay occur on any cycle. Once the external device has
assumed address bus ownership, it does not begin checking for BG
again until the cycle after AACK.
assumed address bus ownership, it does not begin checking for BG
again until the cycle after AACK.
NegationÑMay occur when an external device must be kept from
using the address bus. The external device may still assume address
bus ownership on the cycle that BG is negated if it was asserted the
previous cycle with other bus grant qualiÞcations.
using the address bus. The external device may still assume address
bus ownership on the cycle that BG is negated if it was asserted the
previous cycle with other bus grant qualiÞcations.
7.2.1.3 Address Bus Busy (ABB)
The address bus busy (ABB) signal is both an input and an output signal.
7.2.1.3.1 Address Bus Busy (ABB)ÑOutput
Following are the state meaning and timing comments for the ABB output signal.
Following are the state meaning and timing comments for the ABB output signal.
State Meaning
AssertedÑIndicates that the MPC8260 is the current address bus
master. The MPC8260 may not assume address bus ownership in
case a bus request is internally cancelled by the cycle a qualiÞed BG
would have been recognized.
master. The MPC8260 may not assume address bus ownership in
case a bus request is internally cancelled by the cycle a qualiÞed BG
would have been recognized.
NegatedÑIndicates that MPC8260 is not the current address bus
master.
master.
Timing Comments
AssertionÑOccurs the cycle after a qualiÞed BG is accepted by
MPC8260 and remains asserted for the duration of the address
tenure.
MPC8260 and remains asserted for the duration of the address
tenure.
Turn-Off SequencingÑNegates for a fraction of a bus cycle (1/2
minimum, depends on clock mode) starting the cycle following the
assertion of AACK. It then goes to the high impedance state.
minimum, depends on clock mode) starting the cycle following the
assertion of AACK. It then goes to the high impedance state.