SVAT Electronics CLEARVU11 User Manual
SVAT ELECTRONICS
now you can see
CLEARVU11
37
SOFTWARE UPGRADE (Administrator mode only)
In Menu display, press
▲▼ to
change the highlighted option to
Software Upgrade, and then
press ENTER to call up Software
Upgrade display as shown.
FACTORY DEFUALTS
If you choose to reset your DVR, highlight the Factory Default tab. You will be prompted to either confirm or cancel
resetting to factory defaults. Press ESC to cancel or Enter to fully restore your DVR to the factory settings.
resetting to factory defaults. Press ESC to cancel or Enter to fully restore your DVR to the factory settings.
Please note that a backup device must be connected to complete the software upgrade.
The operations are as below:
•
▲▼◄►- Press these buttons to select the items.
• ESC (MENU/ESC) - Press this button to escape from this screen, and return to Menu display.
Following is a brief description for each item and its specific operations:
• Backup Device – press ENTER to call up Backup Device dialog (if there is a backup device connected).
• Disk Storage – to select the disk storage to upgrade. Press +/- buttons to select the available storage.
• Upgrade File – press ENTER to start the upgrade process when the highlighted file is a correct upgrade file. A
confirmation dialog will be shown on the screen, press ENTER to confirm to upgrade the system software.
NOTE : After the software is upgraded, the system will restart immediately. The split window display will be
shown after restart, this may take a few minutes to complete.
SYSTEM SHUTDOWN (Administrator mode only)
In Menu display, press
▲▼ to change
the highlighted option to Shutdown,
and then press ENTER to shutdown the
system. A confirmation dialog box will
be shown on the screen, press ENTER to
confirm the shutdown. The system will
save all the files and all the settings, and
then display a power-off message in the
rolling screen message area. The user
may power off the system safely when
the power-off message is shown.
MAIN MENU