Cisco Cisco ONS 15600 Multiservice Switching Platform (MSSP) Guía De Instalación

Repeat this task as many times as necessary to remove all BLSR span lockouts on the upgrade nodes.

Return to your originating procedure (NTP).

If you are not using SNTP, the upgrade procedure can cause the date and time setting to change. If you 
are using SNTP, you do not need to perform this task.

In node view, click the Provisioning tab, and click the General button.

Set the correct date and time, then click the Apply button. 

Repeat Steps 

 for each remaining node.

Return to your originating procedure (NTP).

If both the Working and Protect TSC cards are loaded with Software R9.2.1.x, you cannot revert to a 
previous software version.

This task resets the date and time at each node.

PC or UNIX workstation

Prerequisite Procedures None

As needed

Onsite or remote (but in the presence of the workstation)

Superuser

This procedure returns the node to the software and database provisioning 
you had before you activated Software R9.2.1.x.

PC or UNIX workstation

As needed

Onsite or remote (but in the presence of the workstation)

Superuser