Manualsbrain.com
  1. Manuels
  2. Marques
  3. 3com
  4. S7906E
  5. Guide De Référence

3com S7906E Guide De Référence

Télécharger
Page de 2327
 
1-39 
Description 
Use the pim ipv6 triggered-hello-delay command to configure the maximum delay between hello 
messages.  
Use the undo pim ipv6 triggered-hello-delay command to restore the system default.  
By default, the maximum delay between hello messages is 5 seconds.  
Examples 
# Set the maximum delay between hello messages to 3 seconds on VLAN-interface 100.  
<Sysname> system-view 
[Sysname] interface vlan-interface 100 
[Sysname-Vlan-interface100] pim ipv6 trigged-hello-delay 3 
probe-interval (IPv6 PIM view) 
Syntax 
probe-interval interval 
undo probe-interval 
View 
IPv6 PIM view 
Default Level 
2: System level 
Parameters 
interval: Register probe time in seconds, with an effective range of 1 to 1799.  
Description 
Use the probe-interval command to configure the register probe time.  
Use the undo probe-interval command to restore the system default.  
By default, the register probe time is 5 seconds.  
Related commands: register-suppression-timeout. 
Examples 
# Set the register probe time to 6 seconds. 
<Sysname> system-view 
[Sysname] pim ipv6 
[Sysname-pim6] probe-interval 6 
register-policy (IPv6 PIM view) 
Syntax 
register-policy acl6-number 
undo register-policy