Exegin Technologies Limited Q53 Manuel D’Utilisation

8

Q53 Installation and Configuration Guide © Exegin Technologies Limited, 2009

1. Overview Of The Manual
Contents of the Manual

1

O

VERVIEW

 O

F

 T

HE

 M

ANUAL

This manual describes the installation and configuration of the Q53 ZigBee / 802.15.4 
Gateway Bridge on your network. For the latest information on the Q53, please see the 
Technical Support section of Exegin’s Web site: 

This manual contains the following chapters:

2: 

.   

A description of how 

the Q53 works, and its main features.

.   

Installing and connecting the Q53 ZigBee / 802.15.4 Gateway 

Bridge to a TCP/IP network.

Utilities provided with the Q53 ZigBee / 802.15.4 Gateway 

Bridge and some basic TCP/IP commands that you will need to configure the Q53.

Describes how to set up the TCP/IP network 

parameters on the Q53.

.   

Describes how to set up the Zigbee and 

bridging parameters on the Q53 to establish a Zigbee bridge over your TCP/IP network.

Descriptions of the Q53 web pages for 

configuring the Zigbee gateway bridge device and viewing its status.

.   

Provides a complete command list and information about 

using the Q53’s command line interface shell. Describes the Q53 naming scheme, how 
to reset units to factory defaults and how to upgrade the firmware.

Topics covered include product 

architecture, general options, security features, using the FTP daemon to access the Q53, 
and managing the Q53 with SNMP.

Providing hardware and software specifications for the Q53, 

connector pinouts, LED status indicators and variable definitions.

Where to find help and how to return the Q53 for repair.

.