Honeywell International Inc. CS19A Manuale Utente

3 - 25

with your scanner, the scanner will not reconnect to the Bluetooth device 
when it is back in range.  If you want to re-link to the charge base, refer to 

Note: The multiple work groups option is not available when you are using 

the scanner with Bluetooth devices other than the charge base.

You may also use the scanner with a PDA or a Honeywell Mobility Systems 
device.  Scan the bar code below and follow the instructions supplied with 
your Bluetooth device to locate the scanner, and connect with it.  

Some devices require a PIN code as part of the Bluetooth security features.  
Your scanner’s default PIN is 1234, which you may need to enter the first 
time you connect to your PDA or PC.  The PIN code must be between 1 

and 16 characters.  To change the PIN, scan the bar code below and then 
scan the appropriate numeric bar codes from the 

 

inside the back cover of this manual.  Scan Save to save your selection.

The settings described below can help you customize the re-linking behavior of 
the cordless area-imaging system to obtain the best compromise between con-
venience and low interference.
Note: ISM band refers to the 2.4 to 2.48 GHz frequency band used by wireless 

networks, cordless phones, and Bluetooth.

Preliminary Draft