Honeywell International Inc. WFSRM Manuale Utente

SWIFT™ Smart Wireless Integrated Fire Technology Manual — P/N LS10036-000NF-E:C  5/8/2015

17

FWSG FlashScan Wireless System Gateway

The gateway provides isolation of short circuits of the SLC in Class A (Style 6) installations. SLC 
connections are power-limited by the panel. +24VDC must be power-limited by the source.

To successfully configure and/or program the gateway:

1. Create a profile. A profile binds a gateway and the devices in a mesh network together.  The 

profile will contain a mesh ID that is used when forming the associations. All devices, 
including the gateway, require a common profile.

2. Distribute the profile. Distribute the profile to every device that will be a part of the mesh. This 

will enable all the devices that have that profile to form associative links when the mesh is 
formed.

3. Form the mesh. The mesh cannot be formed until the profile is assigned to the gateway and 

distributed to its devices. 

These steps may be performed with or without using SWIFT Tools.

This section explains the configuration of the gateway using only a magnet and a screw driver. For 
configuration instructions using SWIFT Tools, refer to Section 2.8.2. 

There are two ways to provide a gateway with a profile without using SWIFT Tools.



Create a new profile using the gateway.



Assign a previously created profile to the gateway using a distributor.

To create a unique profile in the gateway without using SWIFT Tools: 

+

+

-

-

+

-

SLC in from FACP/device

External +24VDC Power

SLC out to next device (Class B)
or SLC return to FACP (Class A)

2.

6

.w

m

f

NOTE: It is recommended to use the same wire gauge if there are multiple connections to the 
same terminal.