Honeywell International Inc. WFSSM Manuale Utente

SWIFT® Smart Wireless Integrated Fire Technology Manual — P/N LS10036-000SK-E:B 11/9/2017

Mounting and Wiring

WSK-WGI Wireless System Gateway

2.7.2 Wiring

•

All wiring must be installed in compliance with the National Electrical Code and the local codes having jurisdiction.

•

12-18 AWG is recommended.

For wiring connections:
1.

Strip about 3/8” of insulation from the end of the wire.

Slide the stripped end of the wire under the appropriate terminal and tighten the screw.

Figure 2.4 Attaching Cover to Mounting Plate

2.3

locating pin

NOTE: Do not loop the wire under the screw terminals.

Figure 2.5 WSK-WGI Mounting Plate - Terminal Layout

A7 - SLC Out+/In+

A6 - SLC In+/Out +

A5 - SLC- (Common)

A4 - SLC Power Select 2

A3 - Power +24VDC

A2 - Power Ground

A1 - SLC Power Select 1

4.w