Manuali utente per Controlled Electronic Management Systems Ltd S610MSCRM

Sommario

• 1 Introduction

  8
  • How to use an S610S reader

    10
  • LED Card Response table

    10
  • 1.1 Cabling requirements

    10
  • 1.2 Typical S610S Access Control network

    11
    • Using an Ethernet Control Module (ECM)

      11
  • 1.3 S610S/S600S PCB layout

    11
• 2 Quick Guide to setting up S610S

  12
• 3 Connecting an S610S Master Reader

  14
  • 3.1 Open the S610 reader case

    14
  • 3.2 S610S Master Reader 12V Power and Data connections

    14
  • 3.3 Extra settings required, made on the reader

    14
    • Reader Address

      14
    • Door Mode

      14
    • Card Type

      15
    • Read Head

      15
    • Auxiliary Devices

      15
  • 3.4 Addressing an S610S master reader

    15
    • S610S Reader in Normal Operation

      16
    • Telnet or HyperTerm serial network controller

      16
  • 3.5 S610S Connecting Master Reader Inputs

    16
    • Test I/O states using reader’s diagnostic mode

      17
  • 3.6 Monitoring Inputs for Cable Tampers

    17
    • Enable 4-state tamper detect

      18
  • 3.7 Using an external read head

    18
  • 3.8 S610S Lock and spare output relay connections

    18
    • Connecting a lock

      18
    • Using a Fail secure lock connected to a reader

      19
    • Connecting a Sounder to a spare output relay

      19
    • Invert relay output

      19
• 4 Connecting an S610S to an Exit Reader

  20
  • 4.1 S610S Master Reader 12V Power and Data connections

    20
    • Setting the Master S610S Exit reader configuration

      20
    • Devices Application - Setting the S610S Exit reader configuration

      21
  • 4.2 S610S Master with Slave input connection table

    21
• 5 Connecting an S610S to a DIU

  22
  • 5.1 Connecting an S610S to a DIU210

    22
  • 5.2 Connecting a powered lock to a DIU

    23
    • Using a Fail secure lock connected to a DIU

      23
    • S610S with DIU Input connection table

      23
    • Set up the S610S with DIU

      24
    • Devices Application - Setting the S610S Exit reader and DIU configuration

      24
    • Local Sounder output

      24
• 6 AC2000 Devices Application tasks

  26
  • 6.1 Add the S610S reader to the AC2000 system

    26
    • Add S610S Exit/slave reader

      26
    • Enable Read head – S610S only

      26
  • 6.2 Changing reader Door Mode TIME duration settings

    26
  • 6.3 Changing other reader settings

    27
  • 6.4 Access control using PIN Only

    29
  • 6.5 Card, Cardswipe and PIN or PIN ONLY options

    30
  • 6.6 Extended Timezone configuration

    31
• 7 Door Modes

  33
  • 7.1 Door mode

    34
  • 7.2 Verification 24, Verification 32

    34
    • Desfire Verification

      34
    • Encrypted verification – Mifare Finch

      34
  • 7.3 Passenger mode

    34
    • Interlocking Passenger mode (Lobby Mode)

      35
  • 7.4 Control Post mode

    35
  • 7.5 PIR mode

    35
  • 7.6 Passenger-staff exit mode

    36
    • Air-Bridge with Passenger-Staff exit mode

      36
    • Second Swipe Action configuration

      37
  • 7.7 Trolley mode

    38
  • 7.8 Turnstile Mode

    38
    • Selecting S610S Turnstile Mode

      38
    • Single S610S reader – Fail Secure/Fail Safe

      38
    • Controlling power to a turnstile

      39
    • Wiring a bidirectional turnstile

      39
    • S610E/S610S Inputs and Outputs

      39
    • AC2000 – Configuring Turnstile Mode

      41
  • 7.9 Equipment Enable mode

    42
    • Setting Timing controls on equipment

      42
    • Functionality

      42
    • Automatic equipment disable feature

      43
    • Equipment Enable - Time settings

      43
    • Equipment Enable card usage outcome codes

      43
    • Connection Diagram for Equipment mode

      44
    • AC2000 software settings for equipment mode

      44
    • Equipment Mode; Input configuration

      44
    • Alarm Configuration

      45
  • 7.10 Multiple badge access

    45
• 8 Interlock

  46
  • 8.1 Interlock in Door Mode

    46
    • Configure the reader’s interlock input

      46
    • Configure the reader’s interlock output

      46
    • Configuring Interlock Input IP 3, or IPB (if DIU)

      46
  • 8.2 Passenger mode interlock – Lobby Mode

    47
    • Without a Valve Lobby Controller

      47
    • No access on interlock

      47
    • With a Valve Lobby Controller

      47
• 9 Other AC2000 software configurations

  48
  • 9.1 To Edit or Add an input for AED alarm management

    48
    • S610E input table – No DIU

      48
    • S610E with DIU Input table

      48
  • 9.2 Disabling an Input using AC2000 software

    48
  • 9.3 Input/output Mapping

    49
    • Mapping an input to an output

      49
  • 9.4 Configuring a spare Output Relay

    49
    • Connecting a Sounder.

      50
  • 9.5 Other AC2000 configuration options

    50
    • Access Levels

      50
• 10 S610S onboard diagnostic mode

  52
  • 10.1 Using Diagnostic Mode

    52
  • 10.2 S610S menu tree

    52
  • 10.3 Information Menu

    53
    • Network

      53
    • Versions

      53
    • Database

      53
    • System

      53
  • 10.4 Test Menu

    54
    • Local Device

      54
    • Aux Device

      54
    • Testing Reader Inputs

      54
  • 10.5 Configure Menu

    55
  • 10.6 Setting the correct readhead technology

    55
    • Prox:

      55
    • Card Definition (or Card format)

      55
    • Smarthead

      55
  • 10.7 Adjusting optical Tamper Thresholds

    56
  • 10.8 Disable diagnostic mode pin

    56
  • 10.9 Updating Firmware

    56
    • AC000 web configuration tool

      56
    • Other options may include

      57
• 11 Appendix

  58
  • 11.1 Check List/Commissioning Sheet

    58
  • 11.2 S400 Exit Reader Connections

    58
  • 11.3 CLK Air Bridge

    58
  • 11.4 S610S Specification Sheet

    59