Zeni Lite Buoy Co. Ltd. 4180026 ユーザーズマニュアル
Data messages and data sources
Page 46
9 Data messages and data sources
The transceiver can be configured to transmit a range of data messages in addition to the standard AIS AtoN
position report. The purpose, content and means of configuring supported message types is described in the
table below.
position report. The purpose, content and means of configuring supported message types is described in the
table below.
Configuration of the AtoN for capture of data for messages #6 and #8 is described in the following sections.
The options available for data capture depend on the transceiver variant.
The options available for data capture depend on the transceiver variant.
9.1 Product variants without the extended sensor interface
The data payload for binary messages #6 or #8 must be provided by external equipment interfaced to the
transceiver using the transceiver NMEA0183 port 1 available at the Power and transceiver interface connector
described in section 5.4.1. The payload data for the message is requested by the transceiver using a
proprietary MCR sentence and provided by the external equipment using the MPR sentence defined in section
10.2.9.
transceiver using the transceiver NMEA0183 port 1 available at the Power and transceiver interface connector
described in section 5.4.1. The payload data for the message is requested by the transceiver using a
proprietary MCR sentence and provided by the external equipment using the MPR sentence defined in section
10.2.9.
9.2 Variants with the extended sensor interface
The extended sensor interface supports the construction of data payloads for the following messages:
ID
Message
type
type
Description and use
Content sources
6
Addressed
binary data
binary data
This message is addressed to another
individual AIS station, usually an AIS base
station, which is configured to decode the
message content. The message content is
binary data in a standardised or proprietary
format. The message may be used to
communicate status information about the
AtoN and / or metrological and hydrological
data captured at the AtoN.
individual AIS station, usually an AIS base
station, which is configured to decode the
message content. The message content is
binary data in a standardised or proprietary
format. The message may be used to
communicate status information about the
AtoN and / or metrological and hydrological
data captured at the AtoN.
The binary content for this
message can be generated by
the extended sensor interface,
or provided by suitably
configured third party
equipment. See sections 9.1
and 9.2 for further information.
message can be generated by
the extended sensor interface,
or provided by suitably
configured third party
equipment. See sections 9.1
and 9.2 for further information.
8
Broadcast
binary data
binary data
This message is broadcast to all other AIS
stations. The message content is binary data in
a standardised or proprietary format. The
message may be used to communicate status
information about the AtoN and / or
metrological and hydrological data captured at
the AtoN.
stations. The message content is binary data in
a standardised or proprietary format. The
message may be used to communicate status
information about the AtoN and / or
metrological and hydrological data captured at
the AtoN.
The binary content for this
message can be generated by
the extended sensor interface,
or provided by suitably
configured third party
equipment. See sections 9.1
and 9.2 for further information.
message can be generated by
the extended sensor interface,
or provided by suitably
configured third party
equipment. See sections 9.1
and 9.2 for further information.
12
Addressed
safety
related
message
safety
related
message
This message is addressed to another
individual AIS station and contains safety
related text. The text can warn of a failure of
the AtoN equipment, alert an approaching
vessel to danger of collision with the AtoN or
indicate that the AtoN is operating off position
individual AIS station and contains safety
related text. The text can warn of a failure of
the AtoN equipment, alert an approaching
vessel to danger of collision with the AtoN or
indicate that the AtoN is operating off position
See section 7.3.7 for further
information.
information.
14
Broadcast
safety
related
message
safety
related
message
This message is broadcast to all other AIS
stations and contains safety related text. The
text can warn of a failure of the AtoN
equipment or indicate that it is operating off
position
stations and contains safety related text. The
text can warn of a failure of the AtoN
equipment or indicate that it is operating off
position
See section 7.3.7 for further
information.
information.
T1
T3
T1+S T3+S