Valeport Ltd 0804IDU マニュアル

目次

• SAFETY INSTRUCTIONS

  6
• INTRODUCTION

  8
• Measurement Principle

  9
• Environmental and safety conditions

  10
• Conditions in the measurement environment

  10
• Safety

  11
• Product transport

  12
• Product guarantee

  14
• Conditioning the product before use

  14
• DESCRIPTION OF THE HYDRINS2 / HYDRINS 2 MINI PRODUCT RANGE

  15
• Mechanical description:

  15
• Models in the HydrINS 2 / HydrINS 2 Mini flow meter range

  17
• INSTALLATION LOCATION OF THE HYDRINS 2 / HYDRINS 2 MINI FLOW METER

  19
• Choice of installation location and installation and flow conditions

  19
• Velocity limits for measurement

  20
• Choice of position for the electromagnetic sensor

  21
• Typical installation of HydrINS 2 / HydrINS 2 Mini flow meters

  22
• Inside diameter measurement gauges

  23
• INSTALLATION OF THE HYDRINS 2 / HYDRINS 2 MINI FLOW METER

  24
• Method for installation at the centre:

  24
• Step 1/3: Measuring the inside diameter DI using the gauge

  25
• Step 2/3: Measure length of insertion at the centre LI1/2

  26
• Step 3/3: Probe insertion

  27
• Method for installation at 1/8

  28
• Aligning the guide bar with the direction of flow

  29
• INSTALLING THE PRESSURE CHANNEL ON A DATA RECORDER

  30
• VIEWING MEASUREMENTS BY DISPLAY OR RECORDING

  31
• INSTALLATION OF A DISPLAY

  32
• Preview of Displays

  32
• Mounting the display unit on a wall

  33
• Mode change of the HydrINS 2 and HydrINS 2 Mini probes

  34
• Equipment

  34
• Removal

  34
• Mode change

  36
• Closing the display lids

  38
• Electrical power supply of Display A

  39
• Internal power supply using 3.6 VDC lithium batteries

  41
• External power supply using 3.6 VDC lithium batteries

  41
• Internal power supply using alkaline batteries

  42
• External 9 to 28 VDC power supply connected to the internal terminals.

  42
• External power supply by military connector

  43
• Electrical power supply of Display C

  43
• Electrical power supply of Display and Recording Unit

  44
• Wiring of the entities of the measurement chain

  45
• Internal wiring

  48
• Connections of the HydrINS probe to the Display terminal block

  48
• Pulse output connections to the Display terminal block

  49
• Wiring the 4-20 mA outputs to the terminal block of Display C

  50
• Wiring of the alarm outputs (Display A, C & G)

  51
• SIM insertion with Display G & E

  52
• External connection to Display G & E

  53
• Display G & E installation

  53
• FCC/IC compliance information

  53
• Installing Display G & E and the external antenna

  55
• TECHNICAL CHARACTERISTICS:

  57
• Hydrins II Probe

  57
• Display units

  58
• MAINTENANCE

  59
• MAINTENANCE

  59
• Calibration

  60
• Replacing the batteries of the HydrINS 2 / HydrINS 2 Mini flow meter

  61
• Replacing the display batteries

  61
• PRODUCT DISPOSAL

  62
• SITE ACCORDING TO YOUR PIPE

  63
• APPENDIX 2: INSIDE DIAMETER GAUGES

  72
• 2 PRODUCTS

  73
• HYDRINS 2 MINI FLOW METER

  77
• TABLE OF ILLUSTRATIONS

  78
• LIST OF TABLES

  80
• Figure 1: Location of the sensor on the HydrINS2/HydrINS 2 Mini flow meter

  9
• Figure 2: HydrINS 2/HydrINS 2 Mini data processing system

  10
• Figure 3: Safety chain

  12
• Figure 4: Typical packaging of the HydrINS2/HydrINS 2 Mini

  12
• Figure 5: Pelicase transport case

  13
• Figure 6: HydrINS 2 / HydrINS 2 Mini guide bar connected to the flow meter in the packaging

  14
• Figure 7: Flow meter protection plug

  14
• Figure 8: Mechanical description of the HydrINS 2 / HydrINS 2 Mini flow meter

  15
• Figure 9: Drawing of HydrINS 2 and HydrINS 2 Mini probes

  16
• Figure 10: Flow conditions to be observed

  19
• Figure 11: Maximum velocity for different pipe internal diameters

  20
• Figure 14: View of the different components of the diameter gauge

  23
• Figure 15: Gauge pressure evacuator

  23
• Figure 16: Diagram of installation at 1/8 diameter

  28
• Figure 17: Position of the positive direction arrow on the probe head

  29
• Figure 18: Aligning the flow meter in the direction of flow

  29
• Figure 19: Quickfit connector for the pressure channel between recorder and probe

  30
• Figure 20: Installation configurations for HydrINS 2 / HydrINS 2 Mini

  32
• Figure 21: Application of the magnet to the magnetic switch to activate the Display

  33
• Figure 22: Dimensions for wall-mounting a Display

  33
• Figure 23: Remove the screws from the head of the HydrINS 2 flow meter

  34
• Figure 24: Overview of the inside of the HydrINS 2 flow meter head

  35
• Figure 25: Removal of the cover from the head of the HydrINS 2 flow meter

  36
• Figure 26: Mode 1/Mode 2 change and arrangement of batteries in the HydrINS 2 flow meter

  37
• Figure 27: Locating guides for the head of the HydrINS 2 flow meter

  37
• Figure 28: Positions of Connector J15 and Switch SW2 inside Display A

  40
• Figure 29: Connection of the lithium battery

  41
• Figure 30: Position to use for an external 3.6 V power supply

  41
• Figure 31: Position to use for an external 9-28 V power supply

  42
• Figure 32: Selection of the type of power supply for Display C

  44
• 1)

  45
• Figure 35: 4-20 mA outputs on Display C

  47
• Figure 36: Diagram: connecting the HydrINS probe to the display

  48
• Figure 37: Location of pulse outputs

  49
• Figure 38: Location of the 4-20 mA outputs (Display C)

  50
• Figure 39 : External connection to Display G and E

  53
• Figure 40 : Aerial buried under asphalt

  56
• Figure 41: Maintenance of a flow meter measuring water loaded with metal particles

  59
• HYDREKA calibration certificate

  60
• Figure 43: Reinitialisation of the battery levels in HydrINS 2 in Mode 1 in Winfluid

  61
• in Winfluid

  62
• Table 1: Upstream disturbance-free straight lengths to be observed

  20
• diameter

  28
• Table 3: Wiring of HydrINS 2 / HydrINS 2 outputs in Mode 1

  45
• Table 4: Cable connections according to colour and terminal block designation

  49
• Table 5: Connection of pulse outputs – Terminal block designation – Output

  50
• Table 6: Connections for the active 4 – 20 mA outputs (power supplied by the display unit)

  51