Generac Power Systems H-100 사용자 설명서

“Warmed Up, Alarms On”

Generator is started, warmed up, and the hold-off 
alarms are enabled.

“Running,cooling down”

Generator is still running, but waiting for cool down 
timer to expire.

“Stopping”

Generator is running down after being turned off 
normally.

“Stopping due to Alrm”

Generator is running down after being turned off due 
to a shutdown alarm.

“Stopped due to Alarm”

Generator is stopped due to a shutdown alarm.

LINE 3:  System Time and Date. It is able to be 
changed on this page by using the arrow buttons to 
go from field to field or to modify a field in edit mode 
and the “ENTER” button to enter and exit edit mode. 
There are five editable fields: Hours, Minutes, Month, 
Day, and Year. The day of the week will change as the 
displayed date is changed. See the “SET DATE AND 
TIME” section of this manual for details.

LINE 4:  “More” field to allow page selection.

Press the “ENTER” button.

This is a typical second System Status page. 

LINE 1:  Firmware and Hardware release versions.

LINE 2:  Configuration File identifier – serial num-
ber, model number, or text. 

LINE 3: ILC program name. This text string is blank 
or blocks (as shown above) when there is no ILC 
program loaded. 

LINE 4: ILC program running status followed by the 
“More” field to allow page selection.

There are four Maintenance Status pages. The first 
three pages show the status of the scheduled mainte-
nance items. The fourth page allows changing of the 
display contrast.

Do the following to view the service pages:

Press the “MENU” button.

Press the 

 button three times or the  button 

once.

Press the “ENTER” button.

This is a typical first Maintenance Status page. Each 
line displays a maintenance item that has been set 
up via GenLink. The value displayed is the approxi-
mate % of life remaining before maintenance should 
be performed. Refer to the Maintenance setup using 
GenLink.

Press the “ENTER” button.

This is a typical second Maintenance Status page. 

  

17