Fujitsu P2X0-0202-01EN 사용자 설명서

6.3 E-mail Messages

ETERNUSmgr User Guide -Introduction- P2X0-0202-01EN

When "SYSYTEMERR(XXXXXXXX)" (XXXXXXXX is an error code) is dis-
played, contact your maintenance engineer.
"When a message such as "<Component>#<Serial Number>:<Status>" is dis-
played, it indicates a device component and the status. Check the details, and con-
tact your maintenance engineer.

When "Hardware Status was changed. See below..." is displayed, the following message may also be dis-
played to indicate the location and status of the affected component.

• Component

Indicates the relevant component of the target device. Components vary depending on Target Type,
however they are generally as follows:

- ControllerEnclosure
- DriveEnclosure
- BatteryEnclosure
- FCCable
- RCICable
- DEICable
- PANEL
- BatteryUnit
- BatteryChargerUnit

Caution:

See

"1.2 ETERNUSmgr Functions" (page 4)

for details of which components of each

device are monitored.

• Serial number

Indicates the index number of the component. This may differ according to the type of target
device, however it is generally in the form of "#nn" or "#nnnn". Some components have no serial
numbers, and some always return "#00" or "#0000".

• Status

The following component status conditions are possible:

- ALARM

A failure has occurred (all components)

- WARNING

Warning (all components)

- BTU-CAUTION

Battery replacement limit exceeded (Controller Enclosure, and
Battery Enclosure)

- BTU-WARNING

Less than six months to battery replacement limit (Controller
Enclosure, Battery Enclosure, and Battery Unit)

Caution:

FC cables of ETERNUS3000, ETERNUS GR710, GR720, and GR730 have no WARN-
ING status.